|
|
| ChannelElement (uint8_t *ptr) |
| | Constructor.
|
|
virtual QString | name () const |
| | Returns the channel name.
|
|
virtual void | setName (const QString &name) |
| | Sets the channel name.
|
|
virtual Frequency | rxFrequency () const |
| | Returns the RX frequency.
|
|
virtual void | setRXFrequency (const Frequency &freq) |
| | Set RX frequency.
|
|
virtual bool | validTXFrequency () const |
| | Returns true, if a valid TX frequency is stored.
|
|
virtual Frequency | txFrequency () const |
| | Returns the TX frequency.
|
|
virtual void | setTXFrequency (const Frequency &freq) |
| | Set TX frequency.
|
|
virtual void | clearTXFrequency () |
| | Invalidates the TX frequency.
|
|
virtual ChannelType | channelType () const |
| | Returns the channel type.
|
|
virtual void | setChannelType (ChannelType type) |
| | Sets the channel type.
|
|
virtual Channel::Power | power () const |
| | Returns the channel power setting.
|
|
virtual void | setPower (Channel::Power power) |
| | Sets the channel power.
|
|
virtual bool | loneWorkerEnabled () const |
| | Returns true, if the lone-worker feature is enabled.
|
|
virtual void | enableLoneWorker (bool enable) |
| | Enables/disables lone worker feature.
|
|
virtual FMChannel::Bandwidth | bandwidth () const |
| | Returns the bandwidth for FM channels.
|
|
virtual void | setBandwidth (FMChannel::Bandwidth bw) |
| | Sets the FM channel bandwidth.
|
|
virtual bool | validScanListIndex () const |
| | Returns true, if the scan list index is set.
|
|
virtual unsigned int | scanListIndex () const |
| | Returns the 0-based scan list index.
|
|
virtual void | setScanListIndex (unsigned int idx) |
| | Sets the scan list index.
|
|
virtual void | clearScanListIndex () |
| | Invalidates the scan list index.
|
|
virtual bool | talkaroundEnabled () const |
| | Returns true if talkaround is enabled on this channel.
|
|
virtual void | enableTalkaround (bool enable) |
| | Enables/disables talkaround feature on this channel.
|
|
virtual Admit | admitCriterion () const |
| | Returns the admit criterion.
|
|
virtual void | setAdmitCriterion (Admit admit) |
| | Sets the admit criterion.
|
|
virtual bool | rxDMRAPRSEnabled () const |
| | Returns true if DMR APRS reception is enabled.
|
|
virtual void | enableRXDMRAPRS (bool enable) |
| | Enables/disables DMR APRS reception.
|
|
virtual bool | emergencyNotificationEnabled () const |
| | Retruns true, if the emergency notification is enabled.
|
|
virtual void | enableEmergencyNotification (bool enable) |
| | Enables/disables emergency notification.
|
|
virtual bool | emergencyACKEnabled () const |
| | Retruns true, if the emergency ACK is enabled.
|
|
virtual void | enableEmergencyACK (bool enable) |
| | Enables/disables emergency notification.
|
|
virtual bool | validEmergencySystemIndex () const |
| | Returns true if the emergency system index is set.
|
|
virtual unsigned int | emergencySystemIndex () const |
| | Returns the emergency system index.
|
|
virtual void | setEmergencySystemIndex (unsigned int idx) |
| | Sets the emergency system index.
|
|
virtual void | clearEmergencySystemIndex () |
| | Invalidates the emergency system index.
|
|
virtual Level | squelchLevel () const |
| | Returns FM and DMR squelch level.
|
|
virtual void | setSquelchLevel (Level level) |
| | Sets the FM and DMR squelch level.
|
|
virtual bool | rxOnlyEnabled () const |
| | Returns true if the channel is RX only.
|
|
virtual void | enableRXOnly (bool enable) |
| | Enables RX only for the channel.
|
|
virtual bool | dmrAPRSEnabled () const |
| | Returns true if DMR APRS is enabled.
|
|
virtual void | enableDMRAPRS (bool enable) |
| | Enables DMR APRS for the channel.
|
|
virtual bool | privateCallACKEnabled () const |
| | Return true if private calls are confirmed.
|
|
virtual void | enablePrivateCallACK (bool enable) |
| | Enables confirmation of private calls.
|
|
virtual bool | dataACKEnabled () const |
| | Return true if data is confirmed.
|
|
virtual void | enableDataACK (bool enable) |
| | Enables confirmation of data.
|
|
virtual bool | dcdmEnabled () const |
| | Return true if DCDM (dual capacity direct mode) is enabled.
|
| virtual void | enableDCDM (bool enable) |
| | Enables DCDM (dual capacity direct mode).
|
|
virtual DMRChannel::TimeSlot | timeslot () const |
| | Returns the timeslot of the channel.
|
|
virtual void | setTimeslot (DMRChannel::TimeSlot ts) |
| | Sets the timeslot of the channel.
|
|
virtual unsigned int | colorCode () const |
| | Returns the color code of the channel.
|
|
virtual void | setColorCode (unsigned int cc) |
| | Sets the color code of the channel.
|
|
virtual bool | encryptionEnabled () const |
| | Returns true if encryption is enabled.
|
|
virtual void | enableEncryption (bool enable) |
|
virtual bool | validGroupListIndex () const |
| | Returns true if group list index is valid.
|
|
virtual unsigned int | groupListIndex () const |
| | Get group list index.
|
|
virtual void | setGroupListIndex (unsigned int idx) |
| | Set group list index.
|
|
virtual void | clearGroupListIndex () |
| | Invalidates group list index.
|
|
virtual unsigned int | dmrAPRSChannelIndex () const |
| | Returns DMR APRS report channel index.
|
|
virtual void | setDMRAPRSChannelIndex (unsigned int idx) |
| | Sets the DMR APRS report channel index.
|
|
virtual SelectiveCall | rxTone () const |
| | Returns the RX tone.
|
|
virtual void | setRXTone (const SelectiveCall &tone) |
| | Sets the RX tone.
|
|
virtual SelectiveCall | txTone () const |
| | Returns the TX tone.
|
|
virtual void | setTXTone (const SelectiveCall &tone) |
| | Sets the TX tone.
|
|
virtual bool | voxEnabled () const |
| | Returns true, if the VOX is enabled.
|
|
virtual void | enableVOX (bool enable) |
| | Enables the VOX.
|
|
virtual unsigned int | dmrIdIndex () const |
| | Returns the DMR radio id index.
|
|
virtual void | setDMRIdIndex (unsigned int id) |
| | Sets the dmr ID index.
|
|
virtual Channel * | decode (Context &ctx, const ErrorStack &err=ErrorStack()) const |
| | Constructs a channel object.
|
|
virtual bool | link (Channel *channel, Context &ctx, const ErrorStack &err=ErrorStack()) const |
| | Links the channel object.
|
|
virtual bool | encode (const Channel *channel, Context &ctx, const ErrorStack &err=ErrorStack()) |
| | Encodes a channel.
|
|
| Element (const Element &other) |
| | Copy constructor.
|
|
virtual | ~Element () |
| | Destructor.
|
|
Element & | operator= (const Element &other) |
| | Copy assignment.
|
| virtual bool | isValid () const |
| | Returns true if the pointer is not null.
|
| virtual void | clear () |
| | Abstract method to reset the element within the codeplug.
|
|
bool | fill (uint8_t value, unsigned offset=0, int size=-1) |
| | Fills the memsets the entire element to the given value.
|
|
bool | getBit (const Offset::Bit &offset) const |
| | Reads a specific bit at the given byte-offset.
|
|
bool | getBit (unsigned offset, unsigned bit) const |
| | Reads a specific bit at the given byte-offset.
|
|
void | setBit (const Offset::Bit &offset, bool value=true) |
| | Sets a specific bit at the given byte-offset.
|
|
void | setBit (unsigned offset, unsigned bit, bool value=true) |
| | Sets a specific bit at the given byte-offset.
|
|
void | clearBit (unsigned offset, unsigned bit) |
| | Clears a specific bit at the given byte-offset.
|
|
void | clearBit (const Offset::Bit &offset) |
| | Clears a specific bit.
|
|
uint8_t | getUInt2 (const Offset::Bit &offset) const |
| | Reads a 2bit unsigned integer at the given bit-offset.
|
|
uint8_t | getUInt2 (unsigned offset, unsigned bit) const |
| | Reads a 2bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt2 (const Offset::Bit &offset, uint8_t value) |
| | Stores a 2bit unsigned integer at the given bit-offset.
|
|
void | setUInt2 (unsigned offset, unsigned bit, uint8_t value) |
| | Stores a 2bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt3 (const Offset::Bit &offset) const |
| | Reads a 3bit unsigned integer at the given bit-offset.
|
|
uint8_t | getUInt3 (unsigned offset, unsigned bit) const |
| | Reads a 3bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt3 (const Offset::Bit &offset, uint8_t value) |
| | Stores a 3bit unsigned integer at the given bit-offset.
|
|
void | setUInt3 (unsigned offset, unsigned bit, uint8_t value) |
| | Stores a 3bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt4 (const Offset::Bit &offset) const |
| | Reads a 4bit unsigned integer at the given bit-offset.
|
|
uint8_t | getUInt4 (unsigned offset, unsigned bit) const |
| | Reads a 4bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt4 (const Offset::Bit &offset, uint8_t value) |
| | Stores a 4bit unsigned integer at the given bit-offset.
|
|
void | setUInt4 (unsigned offset, unsigned bit, uint8_t value) |
| | Stores a 4bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt5 (const Offset::Bit &offset) const |
| | Reads a 5bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt5 (unsigned offset, unsigned bit) const |
| | Reads a 5bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt5 (const Offset::Bit &offset, uint8_t value) |
| | Stores a 5bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt5 (unsigned offset, unsigned bit, uint8_t value) |
| | Stores a 5bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt6 (const Offset::Bit &offset) const |
| | Reads a 6bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt6 (unsigned offset, unsigned bit) const |
| | Reads a 6bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt6 (const Offset::Bit &offset, uint8_t value) |
| | Stores a 6bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt6 (unsigned offset, unsigned bit, uint8_t value) |
| | Stores a 6bit unsigned integer at the given byte- and bit-offset.
|
|
uint8_t | getUInt8 (unsigned offset) const |
| | Reads a 8bit unsigned integer at the given byte- and bit-offset.
|
|
void | setUInt8 (unsigned offset, uint8_t value) |
| | Reads a 8bit unsigned integer at the given byte- and bit-offset.
|
|
int8_t | getInt8 (unsigned offset) const |
| | Reads a 8bit signed integer at the given byte- and bit-offset.
|
|
void | setInt8 (unsigned offset, int8_t value) |
| | Reads a 8bit signed integer at the given byte- and bit-offset.
|
|
uint16_t | getUInt16_be (unsigned offset) const |
| | Reads a 16bit big-endian unsigned integer at the given byte-offset.
|
|
uint16_t | getUInt16_le (unsigned offset) const |
| | Reads a 16bit little-endian unsigned integer at the given byte-offset.
|
|
void | setUInt16_be (unsigned offset, uint16_t value) |
| | Stores a 16bit big-endian unsigned integer at the given byte-offset.
|
|
void | setUInt16_le (unsigned offset, uint16_t value) |
| | Stores a 16bit little-endian unsigned integer at the given byte-offset.
|
|
uint32_t | getUInt24_be (unsigned offset) const |
| | Reads a 24bit big-endian unsigned integer at the given byte-offset.
|
|
uint32_t | getUInt24_le (unsigned offset) const |
| | Reads a 24bit little-endian unsigned integer at the given byte-offset.
|
|
void | setUInt24_be (unsigned offset, uint32_t value) |
| | Stores a 24bit big-endian unsigned integer at the given byte-offset.
|
|
void | setUInt24_le (unsigned offset, uint32_t value) |
| | Stores a 24bit little-endian unsigned integer at the given byte-offset.
|
|
uint32_t | getUInt32_be (unsigned offset) const |
| | Reads a 32bit big-endian unsigned integer at the given byte-offset.
|
|
uint32_t | getUInt32_le (unsigned offset) const |
| | Reads a 32bit little-endian unsigned integer at the given byte-offset.
|
|
void | setUInt32_be (unsigned offset, uint32_t value) |
| | Stores a 32bit big-endian unsigned integer at the given byte-offset.
|
|
void | setUInt32_le (unsigned offset, uint32_t value) |
| | Stores a 32bit little-endian unsigned integer at the given byte-offset.
|
|
uint64_t | getUInt64_be (unsigned offset) const |
| | Reads a 64bit big-endian unsigned integer at the given byte-offset.
|
|
uint64_t | getUInt64_le (unsigned offset) const |
| | Reads a 64bit little-endian unsigned integer at the given byte-offset.
|
|
void | setUInt64_be (unsigned offset, uint64_t value) |
| | Stores a 64bit big-endian unsigned integer at the given byte-offset.
|
|
void | setUInt64_le (unsigned offset, uint64_t value) |
| | Stores a 64bit little-endian unsigned integer at the given byte-offset.
|
|
uint8_t | getBCD2 (unsigned offset) const |
| | Reads a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.
|
|
void | setBCD2 (unsigned offset, uint8_t value) |
| | Stores a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.
|
|
uint16_t | getBCD4_be (unsigned offset) const |
| | Reads a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.
|
|
void | setBCD4_be (unsigned offset, uint16_t value) |
| | Stores a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.
|
|
uint16_t | getBCD4_le (unsigned offset) const |
| | Reads a 4-digit (2-byte/16bit) BDC value in little-endian at the given byte-offset.
|
|
void | setBCD4_le (unsigned offset, uint16_t value) |
| | Stores a 4-digit (1-byte/16bit) BDC value in little-endian at the given byte-offset.
|
|
uint32_t | getBCD8_be (unsigned offset) const |
| | Reads a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.
|
|
void | setBCD8_be (unsigned offset, uint32_t value) |
| | Stores a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.
|
|
uint32_t | getBCD8_le (unsigned offset) const |
| | Reads a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.
|
|
void | setBCD8_le (unsigned offset, uint32_t value) |
| | Stores a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.
|
|
QString | readASCII (unsigned offset, unsigned maxlen, uint8_t eos=0x00) const |
| | Reads up to maxlen ASCII chars at the given byte-offset using eos as the string termination char.
|
| void | writeASCII (unsigned offset, const QString &txt, unsigned maxlen, uint8_t eos=0x00) |
| | Stores up to maxlen ASCII chars at the given byte-offset using eos as the string termination char.
|
|
QString | readUnicode (unsigned offset, unsigned maxlen, uint16_t eos=0x0000) const |
| | Reads up to maxlen unicode chars at the given byte-offset using eos as the string termination char.
|
| void | writeUnicode (unsigned offset, const QString &txt, unsigned maxlen, uint16_t eos=0x0000) |
| | Stores up to maxlen unicode chars at the given byte-offset using eos as the string termination char.
|