AnytoneGD32Interface Class Reference

Implements the interface to Anytone GD32 revisions of D578UV radios. More...

#include <anytone_interface.hh>

Inheritance diagram for AnytoneGD32Interface:

Collaboration diagram for AnytoneGD32Interface:

Public Member Functions
	AnytoneGD32Interface (const USBDeviceDescriptor &descriptor, const ErrorStack &err=ErrorStack(), QObject *parent=nullptr)
	Constructs a new interface to Anytone radios.
RadioInfo	identifier (const ErrorStack &err=ErrorStack())
	Returns an identifier of the radio.
Public Member Functions inherited from AnytoneInterface
	AnytoneInterface (const USBDeviceDescriptor &descriptor, const ErrorStack &err=ErrorStack(), QObject *parent=nullptr)
	Constructs a new interface to Anytone radios.
virtual	~AnytoneInterface ()
	Destructor.
void	close ()
	Closes the interface to the device.
bool	getInfo (RadioVariant &info)
	Reads the radio info from the device and returns it.
bool	read_start (uint32_t bank, uint32_t addr, const ErrorStack &err=ErrorStack())
	Starts the read process from the specified bank and at the given address.
bool	read (uint32_t bank, uint32_t addr, uint8_t *data, int nbytes, const ErrorStack &err=ErrorStack())
	Reads a chunk of data from the block-address bno (block number).
bool	read_finish (const ErrorStack &err=ErrorStack())
	This function ends a series of read operations.
bool	write_start (uint32_t bank, uint32_t addr, const ErrorStack &err=ErrorStack())
	Starts the write process into the specified bank and at the given address.
bool	write (uint32_t bank, uint32_t addr, uint8_t *data, int nbytes, const ErrorStack &err=ErrorStack())
	Writes a chunk of data at the address addr.
bool	write_finish (const ErrorStack &err=ErrorStack())
	This function ends a series of write operations.
bool	reboot (const ErrorStack &err=ErrorStack())
	Some radios need to be rebooted after being read or programmed.
Public Member Functions inherited from USBSerial
virtual	~USBSerial ()
	Destructor.
bool	isOpen () const override
	If true, the device has been found and is open.
void	close () override
	Closes the interface to the device.
Public Member Functions inherited from RadioInterface
virtual	~RadioInterface ()
	Destructor.
virtual bool	setDateTime (const QDateTime &datetime, const ErrorStack &err=ErrorStack())
	Some radios allow to set date and time of the internal clock during codeplug upload.

Static Public Member Functions
static USBDeviceInfo	interfaceInfo ()
	Returns some information about this interface.
static QList< USBDeviceDescriptor >	detect (bool saveOnly=true)
	Tries to find all interfaces connected AnyTone radios.
Static Public Member Functions inherited from USBSerial
static QList< USBDeviceDescriptor >	detect (uint16_t vid, uint16_t pid, bool isSave=true)
	Searches for all USB serial ports with the specified VID/PID.
static QList< USBDeviceDescriptor >	detect ()
	Searches for all USB serial ports.

Additional Inherited Members
Protected Types inherited from AnytoneInterface
enum	State {   STATE_INITIALIZED , STATE_OPEN , STATE_PROGRAM , STATE_CLOSED ,   STATE_ERROR }
	Possible states of the radio interface. More...
Protected Slots inherited from USBSerial
void	onError (QSerialPort::SerialPortError error_t)
	Callback for serial interface errors.
void	onClose ()
	Callback when closing interface.
void	signalingChanged ()
	Signaling callback.
Protected Member Functions inherited from AnytoneInterface
bool	enter_program_mode (const ErrorStack &err=ErrorStack())
	Send command message to radio to ender program state.
bool	request_identifier (RadioVariant &info, const ErrorStack &err=ErrorStack())
	Sends a request to radio to identify itself.
bool	leave_program_mode (const ErrorStack &err=ErrorStack())
	Sends a command message to radio to leave program state and reboot.
bool	send_receive (const char *cmd, int clen, char *resp, int rlen, const ErrorStack &err=ErrorStack())
	Internal used method to send messages to and receive responses from radio.
Protected Member Functions inherited from USBSerial
	USBSerial (const USBDeviceDescriptor &descriptor, QSerialPort::BaudRate rate=QSerialPort::Baud115200, const ErrorStack &err=ErrorStack(), QObject *parent=nullptr)
	Constructs an opens new serial interface to the devices identified by the given vendor and product IDs.
QString	formatPinoutSignals ()
	Serializes the pinout signals.
Protected Member Functions inherited from RadioInterface
	RadioInterface ()
	Hidden constructor.
Protected Attributes inherited from AnytoneInterface
State	_state
	Holds the state of the interface.
RadioVariant	_info
	Holds the radio info.

Detailed Description

Implements the interface to Anytone GD32 revisions of D578UV radios.

This interface is identical to the previous ones, except it uses a different VID/PID combo. That is VID 0x2e3c and PID 0x5740 are used.

Constructor & Destructor Documentation

AnytoneGD32Interface()

AnytoneGD32Interface::AnytoneGD32Interface ( const USBDeviceDescriptor & descriptor, const ErrorStack & err = ErrorStack(), QObject * parent = nullptr )

explicit

Constructs a new interface to Anytone radios.

If a matching device was found, isOpen returns true.

Member Function Documentation

identifier()

RadioInfo AnytoneGD32Interface::identifier ( const ErrorStack & err = ErrorStack() )

virtual

Returns an identifier of the radio.

Implements RadioInterface.

---

The documentation for this class was generated from the following files:

• /builddir/build/BUILD/qdmr-0.14.1-build/qdmr-0.14.1/lib/anytone_interface.hh
• /builddir/build/BUILD/qdmr-0.14.1-build/qdmr-0.14.1/lib/anytone_interface.cc